How To Mount Baby Monitor On Wall & Hide Cord

Baby monitors have become one of the essential products for new parents. It is also an efficient way to pay constant attention to your baby without being in the room for every hour of every day. It allows you to keep an eye on your baby from a distance.

Walls are great for mounting a baby monitor. They provide you a bird-eye view of your little baby’s nest. Also, your wall is the most secure place to mount a baby monitor.

But when it comes to mounting the baby monitor, most of the new parents don’t know how to mount baby monitor on wall. If you have bought a new baby monitor then you need to know the proper process for mounting a baby monitor for your baby’s safety and better viewing experience.

Also, many parents don’t realize that there are certain precautions that they should follow while mounting the baby monitor on the wall.

Therefore, to make this complicated task easier, we did some research on this topic and came up with a detailed guide that will help you to mount your baby monitor on the wall safely.

So without further talk, let’s get started.

Mounting your baby monitor on the wall is not only just safe but also convenient. It will give you a birds-eye view of the whole room. So, follow the steps below to mount your baby monitor successfully on the wall –

1. Find the perfect location and angle

Before starting the process, first of all, you have to find the perfect place and angle to mount your baby monitor. Because a wrongly mounted baby monitor can cause physical harm to your baby and it will prevent you from being able to see and hear your baby well.

So, make sure you try different angles until you find one that collects everything you want to capture. Also, make sure that there is no disturbance or any interference with the sound and picture quality when choosing the place to mount your baby monitor.

If you have a newborn baby, it is recommended to place the baby monitor at a higher angle, which will give you a complete view of your sleeping child. But you should lower the angle of the camera when your baby gets older so that you can see your baby playing.

Moreover, make sure the monitor remains a minimum of 5 to 8 feet away from the baby. It will better if you place the monitor as far as possible, while still having a clear view and audio.

where to mount baby monitor

2. Figure out the mounting system

Once you find the best place and angle to mount your baby monitor, now it’s time to prepare the baby monitor wall mount.

Most of the baby monitors out there come with a wall mount and necessary accessories to help mount the baby monitor on the wall. Also, there are some baby monitor models where the wall mount could be built-in the monitor. They come with a simple and secure wall mounting system.

Besides, there are some baby monitors with a more basic mounting system. It could be a small hole in the bottom of the baby monitor. In this case, it is recommended to add tape to ensure the baby monitor’s security.

So, find out the mounting system of your baby monitor.

3. Be mindful of its power source

Before mounting the baby monitor, make sure there is an electric outlet near the spot because your baby monitor will need to be plugged into an outlet.

Also, check that the baby monitor can reach the outlet. If the monitor fails to reach the outlet then you should change the spot or use an extension cord. But using an extension cord is not recommended for everyone. Because there are many situations when babies start playing with it and wrap it around something.

4. Mount your baby monitor

If everything seems OK, then you are all ready to mount your baby monitor. But before you mount the baby monitor to the wall, you must consider the fact that once the monitor is fixed to the wall, it will be difficult for you to take it down.

So, double-check everything before mounting the baby monitor.

5. Do some cable management

Once you successfully mounted your baby mounted, now it’s time to do some cable management. This step is very important especially if you have used an extension cable to connect your baby monitor to the power source.

Loose wires are just so tempting to play with for babies. Therefore, securing all the wires to the wall is essential. Also, they can harm your baby. So, make sure you secure the cables properly. Your baby’s safety worth the extra effort.

Now go for a test run

When you are all done mounting the baby monitor on the wall, now you are ready to start watching your baby without being in the room for the whole day.

If the image quality is not good, then try cleaning the lens of the baby monitor with a microfiber cloth. Tilt your baby monitor manually or with the remote and find the best angle that collects everything you want to capture.

Also, make sure you go through the instruction manual of the baby monitor properly. Play with all the setting options of the monitor and try all the sensors, like motion detection, sound detection, or night vision. Besides, you should check the two-way communication and make sure it is working properly.

Things to consider for safety

If you don’t mount your baby monitor properly then it will prevent you from being able to monitor your baby properly and it can also harm your baby. Therefore, when mounting a baby monitor, your need to consider few key points.

Here are few things to watch out for when mounting a baby monitor camera –

  •  Don’t place the baby monitor too close to your baby. Try to keep the monitor at least 5-8 ft away from your baby.
  •  Don’t let your kids come near the installation area when you are mounting the monitor.
  •  Make sure all the wires and cables are covered properly and secured away from your baby to prevent risk.
  •  If you are going to drill the wall, take proper precautions.
  •  Before mounting the baby monitor on the wall, make sure that everything is OK.
  •  When choosing the area to mount your baby monitor, ensure that you can see and hear your baby.
  • Ask one of your family members to help you in this process.

How to hide baby monitor cords properly?

After mounting your baby monitor, securing all the loose cables is very important. Because they can be very risky for your baby. You may say that your baby is too young to move around and reach for, but we recommend you to do it now.

In 2002, 7 kids died because of wrongly mounted baby monitors and loose cords. Plus, 3 babies were injured. Therefore, to prevent more death or injuries, you should take the safety measure needed to secure the monitor cord. Don’t take too much time to baby-proofing your room because you never know when your baby will be more active and start to explore the room.

Here are few ways to secure your baby monitor’s cord –

1. Using cord cover

To secure the baby monitor’s cord properly, one of the easiest ways is to use a cord cover. Cord covers are just plastic tubes that you fix to the wall and run the cables inside.

These cord covers are very easy to install and you will buy them at any hardware store or on Amazon. They are mostly used in hospitals or schools to hide the wires of different electronic products. Also, you can paint these covers the same colors as your wall to make them blend with your decor.

2. Hide the wires

Hiding the wires behind any furniture is probably the easiest and efficient way to secure your baby monitor’s cables from your baby. You can simply hide the cables behind any furniture or a long curtain. But if your baby is grown enough to move around the room and explore everything, then this option is not recommended for you.

Because then your baby will easily find these cables and start playing with them.

3. Run the cables inside the wall

If you are looking for the safest option to secure your baby monitor’s cords then running the cables inside the wall can be the best option for you.

You just have to drill one hole behind the baby monitor on the wall and another one on the bottom of the wall. Then attach the baby monitor’s cables to a fish tape and slide them from top to bottom.

4. Baby monitor cord clip

To prevent your baby from playing with the cords, you can use baby monitor cord clips to secure the cables. But most experts don’t suggest parents use baby monitor cord clips to secure the cables. Because these clips could become loose after few days.

Therefore, at first, you should consider other ways to secure your baby monitor cords. But these cord clips are better than nothing.

Beware of the condition of the wall

how to mount tv on concrete wall without drilling

When you are going to mount your baby monitor on the wall, make sure the wall’s condition is decent enough to perfectly hold the baby monitor. Because the wall is very old and flimsy, then it can cause an accident.

Also Read: When to Stop Using a Baby Monitor?


Mounting a baby monitor on the wall is the safest and easiest option to consider. But most new parents don’t know how to mount baby monitor on wall. Also, most parents forget to secure the cables after mounting the baby monitor, which can be very dangerous.

In this article, we have shown you how you can easily mount your baby monitor on the wall. Also, we shared few tips which will help you to hide the cables.

The whole process of mounting a baby monitor is pretty simple. But if you feel that you can’t do it yourself then it is recommended to contact an expert who can do the job perfectly.

Hopefully, you got all the information required to mount your monitor on the wall. Thanks for being with us 🙂

Samuel Anali

Tech enthusiast, gamer, programmer, and reviewer, Samuel is always on the lookout for the latest and greatest in technology. With an eye for detail, he loves nothing more than getting his hands on new gadgets and tearing it apart to see how it works. When he's not gaming or programming, you'll find him reading a good book.