A keyboard is one of the dirtiest things in our home. It’s full of dust, dirt, oil, and even bacteria. Dust can prevent key presses from working properly. Dirt and oil can make keys stick, and bacteria can cause illness.
And hair? Hair can get everywhere, including on your keyboard. Anyone who has used a keyboard knows that hair can be a real pain. No matter how often you clean your keyboard, there always seems to be a few stray hairs lurking in the corners. And once one hair finds its way into your keyboard, it’s only a matter of time before the rest follow suit.
While you may not be able to see it, hair can build up on your keyboard and cause all sorts of problems like keys sticking or not working at all. If you’re dealing with the same problem, there are a few ways to clean it.
One way to clean your keyboard is to use a vacuum cleaner. Vacuum cleaners are great for removing all kinds of dirt and debris, including hair. Just make sure you use the right attachment, so you don’t damage your keyboard.
In this article, we’ll show you how to get hair out of keyboard in five different ways. So, without further a talk, let’s get started.
Here are 5 simple methods to get hair out of keyboard.
1. Use a vacuum cleaner to suck up the hair
If hair is the only thing you’re dealing with, one of the quickest and easiest ways to remove hair from a keyboard is to use a vacuum cleaner.
All you need to do is turn on the vacuum and hold the nozzle close to the keyboard surface. The suction will quickly pull up any stray hairs, leaving your keyboard looking clean and new. Also, it will save you a lot of time and effort in the long run.
However, make sure you use the right attachment. A small brush attachment will work great. Also, ensure that you put the vacuum cleaner in the lowest setting because you don’t want to risk damaging your keyboard. With a little effort, you can keep your keyboard looking sharp for years. If you don’t have the necessary accessories then you can check these cool items.
2. Use compressed air to blast the hair away
Another way to remove hair from your keyboard is to use compressed air. The compressed air comes in a can and is specifically designed to blast away dust, dirt, and even hair.
Hold the can upright and spray the nozzle in short bursts. The air will quickly dislodge any hairs that are stuck on the keyboard. It will also clean out any dust or dirt hiding in your keyboard’s crevices. Just ensure you don’t hold the can too close to the keyboard, or you could damage it.
Read: Best Keyboard for Excel
If you’re dealing with a lot of hair, you may need to use a few cans of compressed air. Once you’re finished, your keyboard should be clean and free of any unwanted hairs.
You can get these compressed air cans at any local hardware store or online, and they’re relatively inexpensive.
3. Use a hair dryer to blow away the hair
If you don’t have a vacuum cleaner or compressed air, another way to get rid of hair from your keyboard is to use a hair dryer. It is an effective and easy way to remove hair without damaging your keyboard.
To clean your keyboard with a hair dryer, turn it off and unplug it. Then, use the hair dryer to blow hot air over the keyboard, making sure to get in between the keys. After a few minutes, the hair should be loosened, and you can brush it away with your fingers or a cloth.
You can even use the hair dryer to blow away any dust accumulated on your keyboard. Just make sure not to hold the hair dryer too close to the keyboard, as this could damage it.
When you are done, clean the dust from the keyboard using a brush or a microfiber cloth.
4. Brush the hair away with a small brush
If the hair is not too embedded in the keyboard, you can try to brush it away with a small brush. A toothbrush or a makeup brush will work great.
Simply wet the brush’s bristles with water and gently scrub the keyboard in small circles. The water will help to loosen the hair, and the bristles will help brush it away. You may need to wet the brush a few times to get all of the hair out. But be careful not to use too much water, as this could damage your keyboard. However, don’t forget to wipe the excess water when finished.
5. Remove the keycaps and get the hair out
If you are using a keyboard with removable keycaps, it would be better if you remove all the keycaps and carefully remove the hair between them. This method is a bit time-consuming, but it will surely get all the hair out. You will be able to give your keyboard a deep clean from the inside. Also, you can fix overly sensitive keyboard keys with this method.
For this, you will first require a keycap puller. You may have got one with your keyboard when you bought it. If not, then you can easily find one online or at a computer store.
Once you have the keycap puller, use it to remove all the keycaps from the keyboard gently. Be careful not to pull too hard, or you could damage the keycaps. Then, use a brush or your fingers to remove any hair stuck between the keys. If there is any dust, you can use compressed air to blast it away.
After removing the hair, put all the keycaps back on the keyboard and enjoy your clean keyboard. Also, don’t forget to clean the keycaps as well.
Keeping a keyboard clean is important to maintain its lifespan and performance. And, if you have pets at home, it is even more important to clean your keyboard regularly. Otherwise, hair and debris can get stuck in the keys and create a bad typing experience.
Above, I have described some of the ways through which you can get rid of hair from your keyboard without damaging it. Try out these methods and see which one works best for you. But if you are not confident enough to try any of these methods, then it is always better to take your keyboard to a professional for cleaning.
I hope that this article was helpful and you were able to remove all the hair from your keyboard. If you have any questions or suggestions, feel free to leave a comment below.
Thanks for being with us 🙂